Author: Evano

ABSTRACT Advanced GPS receivers are improving the accuracy of positioning, but in critical locations such as urban areas, GNSS receiver is faced with challenges such as limited satellite availability due to signal blocking problems which degraded the required accuracy. For this reason, different methods of measurement should be used. The aim of this project is…

ABSTRACT The environmental crisis has been termed one of humanity”s most pressing issues due to its numerous aspects, intensity, and consequences (Gerten& Bergmann, 2012 Gottlieb, 2006 Leiserowitz, 2008). The suffering of millions of people across the world, as well as the dangers that humankind”s impact on the environment poses to the planet”s future and human…

ABSTRACT This project is a third-order control extension at the Nigerian Army University Biu in Biu Local Government Area of Borno State. The project was executed using ground survey method and techniques with the aid of differential GPS (DGPS). Geometric data were acquired through: static mode and real-time kinematic mode. The acquired geometric data were…

ABSTRACT This study aims to create an accurate and up-to-date street guide map of Biu Town, Borno State, Nigeria, using geospatial techniques. The research addresses the need for a reliable digital map that can aid urban planning, navigation, and infrastructure development in Biu. Traditional paper maps often become outdated quickly due to urban expansion and…

ABSTRACT The research is on Map Revision of a section of Owerri North LGA, Imo state. Map revision is the process of improving and correcting the content of a map. This is done by updating the information on a map from time to time. The research work aimed at identifying and analyzing the recent changes…

ABSTRACT This project aims to produce an infrastructural map of NITEL Quarter and Television Garage in Television, Kaduna South Local Government Area, Kaduna State. After the perimeter was done, the total area of the project location gotten was 43.123ha (431,123.887m2) and the total perimeter length is 2.192km. The controls used to tie the work are…

ABSTRACT This project was undertaken to acquire data for use in the construction of the Yankura to Dambatta road. To do this, a route survey was carried out using a Total station (Leica TCR 407). Controls were established using a real-time GPS receiver (Hi-Target V30). Data acquired were downloaded from the instrument using the Leica…